Knowledge Base
Categories

How do I update the firmware in my EMU-1?

← Back

Firstly, ensure that an Actisense NGT-1 (with firmware v2.210 or above) is connected to both your PC and the same NMEA 2000 network as the EMU-1 to be updated. Secondly, ensure that any other software program (such as NMEA Reader) has not opened the NGT-1’s COM port.

Toolkit is the simple tool that contains the latest EMU-1 firmware. Run Toolkit and select the NGT-1 COM port from the “Comms” menu. The selected NGT-1 COM port will be remembered for all future sessions but it can be changed at any time if required. Select the EMU-1 to be updated from the “Serial/CAN Device List”:

Click on the “Upgrade Firmware” button in the Toolkit ribbon menu to start the reprogramming process, followed by the “Program” button in the pop-up window.

The blue “Power” LED on the EMU-1 should now be flashing faster (5 times per second) to indicate that the EMU-1 is in Bootloader mode. The “Tx” and “Rx” LED’s on the EMU-1 should be flashing very fast indicating the transfer of firmware information.

Once the upgrade is complete, click “close”.

Contents