X

QNB-1 Quick Network Block

Fault-free, NMEA 2000® backbone connections.

The QNB-1 and QNB-1-PMW provide alternatives to multiple connectors, reducing the cost of an NMEA 2000 cable installation. Perfectly suited to areas of high instrument density, as six drops can be connected.

Where To Buy

NMEA 2000 Certified logo

Fully NMEA 2000 Certified

Ordering information
(Part number/s)

The QNB-1 is available in two versions:
The QNB-1-PMW version is fitted with six standard NMEA 2000 M12 (Micro-fit) female connectors which allow ‘plug and play’ connections for quick and easy installation. A Raymarine STNG backbone can be wired to one side of the QNB-1 to combine standard NMEA 2000 with STNG without the need for adapter cables.

The QNB-1 version is fitted with glands to allow for installation of custom lengths of cable. This is a great option for ‘mix & matching’ standard NMEA 2000 devices with Raymarine STNG devices.

The LEDs provide information for the installer during set up and to indicate the presence of data, power status, power reversal and to show whether the fuses are intact.

FEATURES

  • High quality NMEA 2000 barrier strip connections
  • Diagnostic LEDs
  • Uses standard ATO fuses

 

BENEFITS

  • One unit provides six NMEA 2000 drops
  • Power feed is split to enable longer networks
  • Separate fusing for split power feed provides an easy way to isolate network segments
  • Simple installation on Mini and Micro networks using bulk cable
  • Easy to mix & match NMEA 2000 with Raymarine STNG on opposite sides

DOWNLOAD FULL FEATURES & BENEFITS SHEET HERE

Electrical
Supply voltage 10-35V DC
Supply current, Supply voltage 12/24v (no load) 10mA
10mA
Micro cable fused protection 8A
Mini cable fused protection

 

16A

 

Power Polarity LED Red = Incorrect, Green = Correct
NMEA 2000 Port In/Out
QNB-1-PMW drop connections M12 Female (A-Coded) connector
QNB-1-GLA NMEA 2000 connector 5-way Screw Terminal, 5.08mm Screw Pitch
M20 gland clamping range 6 – 12 mm
Data LED Flashes when data is detected on network
Mechanical
Housing Material Polycarbonate – Light Grey
Lid Material Polycarbonate – Clear
Gasket Material EPDM Synthetic Rubber
M16 gland camping range 4.5 – 10 mm
M20 gland clamping range 6 – 12 mm
Dimensions 160mm (L) x 132.4mm (W) x 80mm (H)
Weight PMW variant 440g
Weight GLA variant 360g
Approvals & Certification
Operating Temperature -20 – +55 °C
Storage Temperature -30 – +70 °C
Humidity 93% @ 40°C
IP Rating IP66
Guarantee 3 years (5 Years if registered)
NMEA 2000 Approved
  • One unit provides six NMEA 2000 drops
  • Power hook up is protected
  • Simple installation on Mini and Micro networks
  • Mix & match NMEA 2000 with Raymarine STNG

NETWORK DIAGRAM

Here are some Frequently Asked Questions about the QNB-1.

Need more help? Visit our Support Centre.

Actisense is dedicated to providing up-to-date software and resources for our products. Here are some useful tools and documentation to help you make the most of your product:

NMEA 2000 Certified logo

Fully NMEA 2000 Certified

Ordering information
(Part number/s)

The QNB-1 is available in two versions:
The QNB-1-PMW version is fitted with six standard NMEA 2000 M12 (Micro-fit) female connectors which allow ‘plug and play’ connections for quick and easy installation. A Raymarine STNG backbone can be wired to one side of the QNB-1 to combine standard NMEA 2000 with STNG without the need for adapter cables.

The QNB-1 version is fitted with glands to allow for installation of custom lengths of cable. This is a great option for ‘mix & matching’ standard NMEA 2000 devices with Raymarine STNG devices.

The LEDs provide information for the installer during set up and to indicate the presence of data, power status, power reversal and to show whether the fuses are intact.

FEATURES

  • High quality NMEA 2000 barrier strip connections
  • Diagnostic LEDs
  • Uses standard ATO fuses

 

BENEFITS

  • One unit provides six NMEA 2000 drops
  • Power feed is split to enable longer networks
  • Separate fusing for split power feed provides an easy way to isolate network segments
  • Simple installation on Mini and Micro networks using bulk cable
  • Easy to mix & match NMEA 2000 with Raymarine STNG on opposite sides

DOWNLOAD FULL FEATURES & BENEFITS SHEET HERE

Electrical
Supply voltage 10-35V DC
Supply current, Supply voltage 12/24v (no load) 10mA
10mA
Micro cable fused protection 8A
Mini cable fused protection

 

16A

 

Power Polarity LED Red = Incorrect, Green = Correct
NMEA 2000 Port In/Out
QNB-1-PMW drop connections M12 Female (A-Coded) connector
QNB-1-GLA NMEA 2000 connector 5-way Screw Terminal, 5.08mm Screw Pitch
M20 gland clamping range 6 – 12 mm
Data LED Flashes when data is detected on network
Mechanical
Housing Material Polycarbonate – Light Grey
Lid Material Polycarbonate – Clear
Gasket Material EPDM Synthetic Rubber
M16 gland camping range 4.5 – 10 mm
M20 gland clamping range 6 – 12 mm
Dimensions 160mm (L) x 132.4mm (W) x 80mm (H)
Weight PMW variant 440g
Weight GLA variant 360g
Approvals & Certification
Operating Temperature -20 – +55 °C
Storage Temperature -30 – +70 °C
Humidity 93% @ 40°C
IP Rating IP66
Guarantee 3 years (5 Years if registered)
NMEA 2000 Approved
  • One unit provides six NMEA 2000 drops
  • Power hook up is protected
  • Simple installation on Mini and Micro networks
  • Mix & match NMEA 2000 with Raymarine STNG

NETWORK DIAGRAM

Here are some Frequently Asked Questions about the QNB-1.

Need more help? Visit our Support Centre.

Actisense is dedicated to providing up-to-date software and resources for our products. Here are some useful tools and documentation to help you make the most of your product:

Related Products