If the software version shown is newer than that installed on your
computer, please 'click' to download the latest version.
Product software is the software program (running on a computer) that can
be used to configure, control and/or monitor the Actisense product.
Software updates are made available for a number of reasons:
- when the software program's features have been improved,
- when a new feature, or features have been added to the software program,
or
- when a specific 'bug' has been found and fixed.
|
| Reader utility updates |
Size |
Date Modified |
| EBL Reader utility tool (v1.080) |
The 'EBL Reader' PC software allows any EBL log files recorded by Actisense 'NMEA Reader' to be viewed. These recorded data files enable basic diagnosis and analysis of NMEA 2000 and NMEA 0183 network problems at a time that is convienient to the engineer. Actisense support may request the e-mailing of an EBL log file as part of an installation issue diagnosis process.
Like 'NMEA Reader', 'EBL Reader' is very helpful to the user as it breaks down the unreadable NMEA 2000 and NMEA 0183 messages into easy to read parameters.
|
|
 |
Actisense EBLReader v1.080 Setup.exe |
868 KB |
13th May 2010 |
|
| NMEA Reader utility tool (v1.300) |
The
'NMEA Reader' PC software allows Actisense NGT-1 owners to view NMEA 2000 information directly from the NMEA 2000 network, which can also enable basic diagnosis of NMEA 2000 network problems. 'NMEA Reader' is very helpful to the user as it breaks down the unreadable NMEA 2000 messages into easy to read parameters.
'NMEA Reader' is also very adept at displaying
NMEA 0183 information, either through the Actisense USG-1 (Isolated USB gateway) or any other safe connection to the PC. As with NMEA 2000 messages, 'NMEA Reader' intelligently breaks down the NMEA 0183 messages into easy to read parameters.
'NMEA Reader' enables anyone to become an NMEA master.
This full release version of NMEA Reader is a recommended upgrade for all Actisense NGT-1 & NMEA 0183 users. |
|
|
Actisense NMEAReader v1.300 Setup.exe |
769 KB |
19th Aug 2010 |
|
| What's
changed details for the NMEA Reader utility tool (v1.300) |
| All
the details required to decide if you should upgrade your NMEA Reader
software to the latest version. This could be due to new features, new options, or
'bug' fixes'. |
|
 |
Actisense NMEAReader v1.300 - Release notes.txt |
6 KB |
19th Aug 2010 |
|
| What's
changed details for the EBL Reader utility tool (v1.080) |
| All
the details required to decide if you should upgrade your EBL Reader
software to the latest version. This could be due to new features, new options, or
'bug' fixes'. |
|
|
Actisense EBLReader v1.080 - Release notes.txt |
3 KB |
13th May 2010 |
|
|
| NDC Control Centre updates |
Size |
Date Modified |
| NDC
configuration tool (Control Centre) (v2.120) |
The
Control Centre PC software allows NDC & NSW owners to re-configure their products.
Options allow selection of Baud rates for input and output NMEA ports, and for
the NDC-1, NDC-2 & NDC-4, selection of which NMEA 0183 sentences are filtered
out. This version of Control Centre is compatible with the NDC-1, NDC-2, NDC-3, NSW-1
and NDC-4.
Extra NDC-4 feature: allows the NDC-4 operating mode of the
NDC-4 to be changed between the standard 'Combine' operating mode and the special
'Autoswitch' operating mode (once the NDC-4's firmware has been updated to v1.080
or above).
Each product's "Full User Manual" provides full operating details for this program. |
|
 |
NDC Control Centre v2.120.zip |
1.75 MB |
9th Apr 2010 |
|
| What's
changed details for the NDC configuration tool (Control Centre) (v2.120) |
| All
the details required to decide if you should upgrade your NDC Control Centre
software to the latest version. This could be due to new features, options, or
'bug' fixes'. |
|
|
NDC Control Centre v2.120 - Release notes.txt |
8 KB |
9th Apr 2010 |
|
|
