NMEA Multiplexer / Combiner 1
Combine / Multiplex all NMEA devices together. Perfect solution to this otherwise impossible task. A PC can read and add to the combined data stream.
NMEA Multiplexer / Combiner 2
Combine / Multiplex all NMEA devices together. Perfect solution to this otherwise impossible task. A PC can read and add to the combined data stream.
NMEA Multiplexer / Combiner 3
Compact design to Combine / Multiplex all NMEA devices together. Perfect solution to this otherwise impossible task. A PC can read and add to the combined data stream.
NMEA to RS232 Opto-Isolator 1
Offers full Galvanic Opto-isolation to protect a PC's receiver against voltage and current spikes, and TransZorb diode to protect a PC's transmit. Can prevent ground loops.
NMEA to RS232 Opto-Isolator 2
Offers full Galvanic Opto-isolation to protect a PC's receiver against voltage and current spikes, and TransZorb diode to protect a PC's transmit. Can prevent ground loops. Case and cable are fully shielded.
 
NMEA Autoswitch 1
Automatically switches highest priority NMEA input device. Intelligent algorithm with 3 processing levels switches the NMEA device with best data to NMEA and RS232 outputs.
NMEA Buffer 1
Galvanic Opto-isolate and buffer NMEA 0183 data for distribution to multiple NMEA devices around a vessel. Boosts weak NMEA signals.
Active DST Module 1
Breathe new digital life into your old and new transducers. Digitises Depth, Speed and Temperature transducer signals into NMEA 0183 data.
RS485 to RS232 Adapter
Converts between RS485 and RS232 using a half-duplex method. Primarily designed to re-flash program Actisense active depth sounder transducers and modules.