|
 |
|
|
|
|
| |
|
|
Click any picture to enlarge
|
|
|
|
 |
|
|
| Connect multiple NMEA devices to your PC,
Chart-plotter, Radar, Autopilot and more... |
This version of the NDC is no longer in production,
please view the NDC-4 product
if you require a new Multiplexer.
The Actisense™ NMEA Multiplexer / Combiner allows connection
of up to four NMEA (National Marine Electronics Association) inputs to be multiplexed
/ combined in to one NMEA output.
This approach offers these major advantages:
- enables the vessel owner complete access to all NMEA data sources, instead of
the standard one device,
- each NMEA input device is Opto-isolated from all other NMEA device in the system,
- any NMEA data not required can be easily filtered out to reduce the total amount
of NMEA data in the system.
- each input and output Baud rate can be changed to match the requirements of connected
devices.
Electrical spike protection is provided as standard on all four input channels using
opto-isolators. This protects any connected equipment from most system faults; a particularly
valuable benefit as equipment requiring the most data, such as a PC or chart plotter,
is often the most expensive to repair or replace.
The NDC-1 Data Combiner contains highly intelligent software that manages the multiplexing
and filtering operation, allowing every input to have a chance of its data reaching
the combined NMEA output.
|
|
