|
|
|
 |
|
|
| Breathe new smart digital life
into your old or new transducers, with this NMEA depth, speed & temperature
digital signal processor ... |
The Actisense™ Active Depth/Speed/Temperature
module is the best solution for interfacing standard analogue transducers
and NMEA 0183 compatible chart plotters, radars, and on-board
laptop PC’s.
Designed for use with most existing analogue transducers already fitted to
a vessel, or new analogue transducers. Our industry proven depth sounder
algorithm has the best-in-class seabed tracking, and when in conjunction
with a good quality depth transducer, can track the seabed down to 0.3m or
1 foot (proven with Airmar transducers).
100W peak depth power enables a maximum depth range of 200m or 660 feet under
optimum conditions (proven with Airmar transducers). 150 KHz & 200 KHz
depth transducer frequencies are available to match most existing transducers.
For enhanced interference rejection (from other sounders), a 235 KHz capable
module is also available.
Log transducer and temperature thermistor interfaces allow additional data
to be provided over the NMEA data stream, giving a cable saving. Easy reprogramming
of the DST module’s software is possible, to include the very latest
software enhancements or customisations.
The DST module’s data interface is configured for NMEA 0183, but can
operate as a fully bi-directional RS485 interface for customised applications,
such as an on-board multiple depth sounder network.
|
|
