|
|
|
 |
|
|
| Opto-isolation provides 2000
volts of protection to the vital NMEA devices onboard, and more... |
The Actisense™ OPTO-2 cable
is an easy, safe and low-cost method of connecting an NMEA system to a laptop
PC (and any other device with a standard RS232 9-pin port). Whilst protecting
the most vital and expensive devices in the NMEA system, it also converts
from the PC standard RS232 9-pin serial communications port to an NMEA 0183
(RS422) marine bus link.
In addition, the OPTO-2 cable and plug-case are fully
shielded to offer a complete solution for system builders that require all components
to be shielded (particularlly in noisy and/or commercial environments).
The OPTO-2 cable is a bi-directional NMEA 0183 (RS422) to RS232 interface
cable, that utilises full galvanic opto-isolation to protect the PC input,
and "tranzorb" protection for the PC output. This provides comprehensive
isolation of expensive PC hardware when connecting to an NMEA 0183 bus that
may have picked up potentially hazardous voltages around the electrically
noisy environment of a vessel.
No external power supply is required as the cable takes all necessary power
from the RS232/PC port. Simple installation requires wiring the open end
to the NMEA bus, and plugging the D-type connector into the PC, to start
receiving the NMEA data - true plug'n'play functionality.
|
|
