|
|
|
 |
|
|
| Opto-isolation provides 2000 volts of protection
to the vital NMEA devices onboard, and more... |
The Actisense™ OPTO-1 cable
is an easy, safe and low-cost method of connecting an NMEA system to a laptop PC (and
any other device with a standard RS232 9-pin port). Whilst protecting the most vital
and expensive devices in the NMEA system, it also converts from the PC standard RS232
9-pin serial communications port to an NMEA 0183 (RS422) marine bus link.
The OPTO-1 cable is a bi-directional NMEA 0183 (RS422) to RS232 interface cable, that
utilises full galvanic opto-isolation to protect the PC input, and "tranzorb" protection
for the PC output. This provides comprehensive isolation of expensive PC hardware when
connecting to an NMEA 0183 bus that may have picked up potentially hazardous voltages
around the electrically noisy environment of a vessel.
No external power supply is required as the cable takes all necessary power from the
RS232/PC port. Simple installation requires wiring the open end to the NMEA bus, and
plugging the D-type connector into the PC, to start receiving the NMEA data - true
plug'n'play functionality.
|
|
